🔧 MASTER LIST: Brand & Error Code Appliance Repair Guide

Appliance Repair Codes

🌀 Samsung Appliance Repair

🔹 Problem: Samsung top load washer “UB” code fix

Cause: UB = Unbalanced load. This happens when clothes are unevenly distributed or the washer is on an uneven floor.

Fix: Pause the cycle, redistribute clothes evenly, and ensure the washer is level. If it repeats, suspension rods or dampers may need replacing.

Q: What does the UB code mean on my Samsung washer? A: It means the load is unbalanced — try redistributing clothes. If it happens often, our Samsung washer repair techs in Tampa Bay can help rebalance and recalibrate your machine.

🔹 Problem: Samsung washer 4C / 5E / OC / SUD errors

Cause: 4C = Water supply issue. 5E = Drain issue. OC = Overfill detected. SUD = Too many suds.

Fix: Check water hoses, clean the drain filter, use HE detergent, and avoid Q: Why does my Samsung washer show 4C or 5E? A: These errors mean water can’t fill or drain properly. We can clear your filter or replace the water valve — same-day in Clearwater & Palm Harbor.

🔹 Problem: Samsung fridge / ice maker not making ice or freezer not cooling

Cause: Frozen water line, failed auger motor, or bad fan.

Fix: Defrost the unit, check the ice maker fan and sensors, and inspect for frost buildup.

Q: My Samsung fridge isn’t making ice — what’s wrong? A: Commonly, the line is frozen or the fan failed. We specialize in Samsung refrigerator ice maker repair in Tampa Bay.

🧺 Whirlpool Appliance Repair

🔹 Problem: Whirlpool washer F3E2 or E1 F9 error

Cause: F3E2 = Temperature sensor issue. E1 F9 = Slow drain.

Fix: Clean the drain pump filter and hose; if persistent, the pressure switch or control board may need service.

Q: What does F3E2 mean on my Whirlpool washer? A: It’s a temperature sensor fault — usually a quick fix for our certified Whirlpool technicians.

🔹 Problem: Whirlpool refrigerator not cooling / ice not working

Cause: Dirty coils, faulty fan motor, or bad compressor. Fix: Clean condenser coils, test the evaporator fan, and replace the start relay if needed.

Q: My Whirlpool fridge is running but not cooling — what can I do? A: Check for dirty coils or a failing fan. We handle Whirlpool refrigerator cooling issues across Pinellas County.

🔹 Problem: Whirlpool WRx models (WRF757SDHZ04 / WRF535SMBM00) ice maker not working

Cause: Clogged fill tube, frozen line, or faulty water valve. Fix: Defrost the fill line, replace the valve, and check temperature sensors.

Q: My Whirlpool ice maker stopped making ice — is it fixable ?A: Yes — most times it’s a frozen fill tube or bad valve. We repair Whirlpool refrigerator ice makers same day.

🧊 GE Appliance Repair

🔹 Problem: GE refrigerator freezing food/ice maker not working

Cause: Thermistor failure, damper stuck open, or faulty ice maker fan.

Fix: Adjust temperature settings, replace the thermistor, and inspect the control board.

Q: Why is my GE fridge freezing food? A: Often it’s a faulty thermistor or stuck damper door — we can fix that same day.

🔹 Problem: New GE front-load washer shakes violently

Cause: Shipping bolts left in place or worn suspension rods. Fix: Remove transit bolts; if Q: Why does my GE washer shake like crazy during spin? A: Usually, the shock absorbers are worn out or it’s not leveled. We handle GE washer vibration repairs across Tampa Bay.

🧊 LG Appliance Repair

🔹 Problem: LG refrigerator glass shelf shattered / CH E code

Cause: Temperature fluctuations or a sealed system fault.

Fix: Replace glass with tempered shelf; CH E = Communication error — may need control board service.

Q: My LG fridge shows CH E — what does that mean? A: It’s a communication error. We can replace or reprogram the control board on LG refrigerators.

🔹 Problem: LG washer UE code

Cause: Unbalanced load. Fix: Rearrange clothes, ensure level, replace suspension if recurring.

🧊 Maytag Appliance Repair

🔹 Problem: Maytag F21 / E2 F6 / F5 E2 / OFB codes

Cause: Drain issue, motor communication error, or door lock fault.

Fix: Clean drain filter, inspect control board and door switch.

Q: My Maytag washer shows F21 — what do I do?A: That’s a drain error. We’ll clean your pump filter and restore full function fast.

🔹 Problem: Maytag washer flashing “Sense Fill Done”

Cause: Faulty pressure sensor or water inlet valve.Fix: Inspect valve and hoses, recalibrate the washer.

❄️ Frigidaire / Electrolux / Bosch / Thermador / Wolf / Kenmore / Wine Coolers

• Frigidaire refrigerator not making ice: Check the water line or inlet valve — we replace both quickly.

• Electrolux repair near me: Authorized Electrolux specialists in Pinellas County.

• Bosch ice maker not working: Often a temperature control or fan motor issue.

• Thermador refrigerator/oven repair: Factory-grade repairs for luxury models.

• Wolf oven repair: We handle temperature calibration and element replacement.

• Kenmore freezer repair: Seal leaks or defrost system issues are common.

• Wine fridge leaking Freon: Requires sealed system repair — our EPA-certified techs handle Freon leaks safely.

🛠 Why Choose Professional Appliance Repair?

📍 Local Experts – Serving Palm Harbor, Largo, Seminole, Clearwater, and all of Pinellas County.

⭐ 5-Star Google Rated – Thousands of happy customers since 2017.

⚡ Same-Day Service – Don’t wait days for a repair — we’re ready when you need us.

🔧 All Major Brands – Samsung, LG, Whirlpool, GE, Sub-Zero, KitchenAid, and more.

💰 Honest Pricing – No hidden fees,